Sketches

This sketch shows the drip pan to the steel decking with a HVAC system located on the 3rd floor of Bishop-Favrao Hall.
This is a detail of the steel tread pan and the landing. The materials include poured concrete, the steel tread pan, a steel beam underneath the landing, and a CMU wall.
Here is a section view of the stairs in BFH. There is a steel tread pan over which concrete is poured. In this sketch are poured concrete, the tread pan, two landings, a railing, and two CMU walls on each floor.
This is the plan view of the stair well between the 4th and 3rd floors in BFH. I've shown the landing on the 4th floor and the landing between the two floors.
This sketch is of the mock-up wall assembly along Perry Street outside of Bishop-Favrao Hall. On the left is a sketch of the wall through the cast stone. On the right is the wall through the Hokie stone. Both drawings are similar and include CMU, precast stone, sill, insulation, and a moisture barrier but the drawing on the left has a space where a window would go.

Above is a sketch of my dorm room. My room is on the second floor of Vawter Hall. I looked up the details on the Virginia Tech website and found the dimensions for a typical room in Vawter and have included them in my sketch. In my room there is a sink, two closets made of wood, a heater, a phone jack, a cable outlet, several power outlets, and a window unit. The wall are made of CMU.

This is a sketch of two wall sections in my dorm room. The sketch on the left is a section of the wall through the window. This section includes the Hokie stone on the exterior and CMU on the interior. There is a heading above the window and a window ledge below. The sketch on the right is a section through the door. There is CMU above and behind the steel door frame.